Saturday, April 9, 2011

GEO 2.1 RELEASED!



GEO 2.1 KEY FEATURES
Gen2 Propshaft Assembly - The Geo 2 comes with a completely new Propshaft Assembly. The design introduces a spring-loaded Drive Core. This Drive Core prevents air loss both on the firing stroke of the bolt, leaving residual, previously wasted air trapped in the valve chamber, as well as ensuring the valve chamber is fully sealed prior to re-filling on the return stroke of the bolt. This results in better efficiency and faster recharge of the valve chamber. The New Finned Propshaft Tip helps keep the propshaft and bolt concentric at all times.
SL3 In-Line Regulator - The SL3 regulator is more accurate, more consistent, with less creep and faster recharge than any previous Eclipse Regulator. On top of that it will allow the Geo 2.1 to operate with LP, MP or HP tanks with no fluctuation in performance or velocity. Switch from HP tank to LP tank without needing to adjust the regulator. The New design means that the Geo 2.1 will shoot down to the last 200psi of tank pressure with next-to-zero loss in velocity. The new SL3 regulator also has reversible and replaceable reg seal.
Shaft4 Barrel - The Shaft4 has been developed specifically to improve efficiency and consistency. By manipulating the length and bore of the rear control bore section the new barrel gives higher velocities than older Shaft barrels for the same settings. This leads to an improvement in efficiency and consistency as well as reducing the sound signature of the marker
Geo 2 GST Bolt Assembly - After the phenomenal success of the GST kit for the Geo, the Geo 2 receives the same treatment as standard. GST Can and GST Geo 2 bolt now work in conjunction with the new sprung Drive Core to further reduce recoil and sound signature, making the Geo 2.1 supremely smooth and quiet.
2010 Circuit Board - New Circuit Board has 92% larger LCD screen with adjustable backlight colour. Optimised solenoid drive circuitry offering increased accuracy of Dwell and ROF control. 16-bit, 16mips PIC microprocessor. Micro and Opto trigger sensing. New GUI (Graphical User Interface).
Connectivity - Capable of connecting the Geo 2.1 to a PC giving the ability to upload Firmware, make Splash Screens and remotely adjust parameters. (Requires Optional USB Adaptor, Software and Cable).
Wider Frame-to-Reg Spacing - An increase in the stance of the Geo 2 changes the basic feel of the marker and allows higher rear hand placement. New 2010 bearing carrier also allows higher trigger placement to match the higher rear hand position resulting in a more instinctive and pointy feel to the marker.
Of course these are just some of the headline changes to the Geo 2.1. On top of these there are the dominant Geo features that have been brought through to the latest creation, such as the ISCIS ACCESS TO THE PLANET ECLIPSE TECHNICAL AND CUSTOMER SUPPORT NETWORK MAKE TECHING A BREEZE... valve system, low dynamic seal count, Cure bolt technology, Deftek feed, Break-Beam Sensor System, POPS ASA, Clamping feed, tool-less maintenance as well as access to the Planet Eclipse Technical and Customer Support network making teching a breeze.

Geo 2.1 Features:
  • Geo 2 GST-Style Bolt Assembly
  • Geo 2 Propshaft with Spring-Loaded Drive Core
  • SL3 Inline Regulator - Works With Any Tank
  • E-Portal Compatible - Update Firmware, Splash Screens and User Settings
  • Shaft4 Barrel 14"/0.689" - Longer, tighter control bore improves efficiency and consistency
  • 92% Larger Multicoloured Transflective LCD Module
  • Ego10-Style Grip Frame and Grips
  • Extended Grip Pitch - Increased Comfortable and Stability
  • Spool Valve Design
  • Low Reciprocating Mass - Bolt 17g
  • ISCIS (Innovative Solenoid Controlled Isolation System) Mechanism
  • SC (Spool-Cure) Bolt - helps eliminate 2nd ball clipping in the feed stack.
  • 6-Second Strip Down - To remove and separate all internal Bolt components
  • Tool-less Bolt removal - all internal bolt components removed without tools
  • BBSS (Break Beam Sensor System)
  • Def-Tek Offset Feed
  • C-Lever Clamping Feedneck with Sprocket Wheel
  • Dual Selectable Trigger Switching - Opto and Micro Switches
  • Dual Trigger Return Mechanisms - Spring and Magnetic Return
  • Integrated Audible Beeper for Alarms and Actuations
  • Capped and Uncapped Ramp Modes
  • All Major Tournament Presets
  • 9 Preset Debounce Modes
  • 5-Point Adjustable Trigger
  • T-Rail Mounting System
  • POPS - On/Off/Purge ASA System

Tuesday, March 15, 2011

GOG Markers and G1/eNVy Blackhearts IN STOCK AND SHIPPING NOW!

G1 Markers are in stock and shipping today! This item qualifies for FREE FEDEX 2 DAY SHIPPING!
G1/eNVy Blackhearts are in stock and shipping today! Upgrade your engine and increase the rate of fire as well as adjust-ability of your marker!
eNVys are in stock, and are a great entry level marker!

Saturday, March 12, 2011

BT TM15




The BT TM-15™ is THE choice for any hardcore woodsball or mil-sim paintball player. Its high performance magnesium body is strong, yet light enough in weight for all-day action. Equipped with features usually found on much more expensive markers, the BT TM-15 features a true electropneumatic operating system as well as reduced sound signature for stealth firing in any of the multiple firing modes. With the standard multiple Picatinny rails, accessory options are nearly endless. Internal airline operation eliminates external hoses. Flip up front and rear sights let you choose traditional sighting or stow away for sight clearance.

TM-15 Features:

  • High Performance, Ultra Strong, Lightweight Magnesium Body.

  • Bolt Out Back Design for Easy Cleaning and Maintenance.

  • Modern Styling.

  • True Electropneumatic Operating System.

  • Shift-On-The-Fly, 4-Position Recreational Firing Mode Switch.

  • Multiple Firing Modes: Semi/PSP/NXL/Millennium.

  • Stealth Body Design Works in Conjunction with the Barrel to Reduce Sound Signature.

  • 14” Barrel with Sound Signature Reduction Porting.

  • Flip-Up Front and Rear Sights.

  • Clamping Feed Elbow.

  • Universal, Mini Style Barrel Threads.

  • Single-Finger Trigger (Double Trigger Kit Available).

  • Multiple Picatinny Rails Allow for Extra Accessories.

  • Quick-Change Battery in the Removable Magazine.

  • Collapsible/Adjustable Rear Stock.

  • Low Pressure Operation (200psi).

  • No External Hoses; Internal Airline Operation.




  • Saturday, March 5, 2011

    NXe packs...back in action!

    NXe packs are back and available at Paintballdelivery.com!



    Black and Digi Cam Elevation packs are in stock and shipping now! Dynasty Blue and Red will be back in stock shortly.

    Thursday, February 17, 2011

    V-Max Loader COMING SOON!!! PRE-ORDER TODAY!

    Valken V-Max Paintball Loader (Black) PRE-ORDER NOW for March delivery
    Features:
    • Speed: 30+ balls per second
    • Capacity: 220 ball capacity
    • Ultra Lightweight
    • Simple & Refined Design: The design of the V-Max has been refined to function simply and reliably, without the need for the complex components found on many modern loaders. Fewer parts. Fewer problems.
    • Super Fast Tool-less Disassembly: Disassembles and reassembles in seconds, so you can spend more time playing and less time cleaning at the end of the day.
    • Quick-change lid: The standard friction lid lets you quickly reload, and is transparent to let you monitor how many paintballs you have left. Easily switch to a speed-feed in seconds, no tools needed.
    • Fast battery replacement: The battery door is located on the outside of the loader, allowing for fast & easy battery replacement, without the need for disassembly.
    • One-Touch On/Off: A one-touch On/Off button and LED display make using your V-Max Loader a breeze.  
    • Valken V-Max Loader...PRE-ORDER HERE!!!

    Monday, February 14, 2011

    Paintball Delivery offering FREE 2-DAY Shipping!

    FREE FED EX 2 DAY SHIPPING ON ALL DOMESTIC ORDERS TOTALING 200.00 OR MORE FOR A LIMITED TIME! TAKE ADVANTAGE OF THIS GREAT OFFER AS PART OF OUR GRAND OPENING THIS SPRING!